This website uses cookies to ensure you get the best experience on our website.

CP-ANW-GPM8F4T-N30

8 Ports Gigabit Managed PoE Switch with 4 SFP Ports

  • Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3i, IEEE802.3z, IEEE802.3x
  • 8 × Gigabit PoE ports and 4 x SFP uplink Ports for high-speed connectivity.
  • Provides PoE output up to 30W per port with a total PoE power budget of 250W
  • Layer-2+ managed switch with supports VLAN, QoS, ACL, port mirroring, link aggregation (LACP).
  • Support ERPS Link redundancy.
  • Store-and-forward switching mode with 8K MAC address auto learning and auto-ageing.
  • Advanced security features including DHCP snooping, IP source guard and DoS prevention.
  • Supports STP, RSTP and MSTP for loop protection and reli able network operation.
  • LED indicators available for power, PoE status, link and activity monitoring.
  • SNMP (V1/V2c/V3) for easy configuration and monitoring.
Datasheet User Manual

Network Port 8 x 10/100/1000Mbps RJ45 Ports
4 x 1000Mbps SFP Ports
1 x console Port
Network Medium 100Base-T: UTP category 3, 4, 5 cable (Maximum 100m)
100Base-Tx: UTP category 5, 5e cable (Maximum 100m)
1000Base-T: UTP category 5e, 6 cable (Maximum 100m)
Switching Capacity 24Gbps
Packet Forwarding Rate 17.856Mpps
Packet Buffer Memory 4.1Mbit
MAC Address Table 8K
Jumbo Frame 10K
MTBF 100000h
LEDs Indicator System indicator: SYS (Green), Network Indicator: Link (Green), SFP Indicator: L/A (Green),
Power Indicator: Green
Transfer Method Store and Forward (Full Wire Speed)
Network Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3i, IEEE802.3z, IEEE802.3x
Ethernet Port Feature 10/100/1000BaseT (X) automatic detection, full / half duplex MDI/MDI-X adaptive
SFP Port Characteristic Gigabit SFP optical fiber interface, default matching optical modules, Need to buy separately,
(optional order mode/ multi-mode, single fiber/ double fiber optical module
PoE Standard 802.3 af/at
PoE Pin Definition 1/2(+),3/6(-)
PoE Power Budget 250W
Redundant Power Input 2 Sets of V+, V- redundant DC power interface (4 Pin Phoenix terminal)
Power Consumption Standby:<10W(NOT PoE), Full load:<250W(with PoE)
Voltage Range 48~57VDC
Operating Temperature -40°C~ +75°C (-40°F to 167°F)
Operating Humidity 5%~90% RH Non condensing
Storage Temperature -40°C~+85°C (-40°F to 185°F )
Storage Humidity 5%~95% RH Non condensing
Dimensions 149.2mm (L) x 122mm (W) x 50mm (H)
Weight ≤1kg
Optical Cable Multi mode:850nm 0~ 550M, Single mode: 1310nm 0~40KM, Optical Cable 1550nm 0~120KM
Lightning Protection Lightning protection: 6KV 8/20us;Protection level: IP40
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±2kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±2kV/DM±1kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (Anti vibration)
IEC60068-2-27 (Anti shock)
IEC60068-2-32 (Free fall)
Port Support IEEE802.3x flow control (full duplex)
Support for broadcast storm suppression based on port rate
Support speed limit for incoming and offline message traffic, with a minimum particle size of 64Kbps.
Support port temperature protection settings
Support port IEEE green Ethernet energy saving configuration
VLAN Support port based VLAN (4K), IEEE802.1q
Support protocol based VLAN
Support Voice VLAN
Support for MAC address-based VLANs
Support Access, Trunk, Hybrid three types of port configuration
Port Aggregation Support LACP
Support static polymerization
Support the largest 8 aggregation groups; each aggregation group supports 8 ports
Multicast Support IGMP Snooping V1/V2 and support 1024 multicast groups at most
Support the user's quick departure mechanism
Support MLD Snooping V1/V2
Support multicast VLAN
Mirror Bi-directional traffic mirroring supporting the basic port
Spanning Tree Support STP (IEEE802.1d)
Support RSTP (IEEE802.1w)
Support MSTP (IEEE802.1s)
Industrial Ring Network Protocol Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring
The self healing time of the ring network is less than 20ms
Loopback Detection
QoS Support Diff-Serv QoS
Each port supports 8 output queues
Support 802.1p/DSCP priority mapping
Support queue scheduling mechanism (SP, WRR, SP+WRR)
Support priority tag Mark/Remark
Support stream based packet filtering
Support for stream based redirection
Support flow based speed limit
ACL Support L2 to L4 packet filtering function, match the first 80 bytes of the message
Provide based on the source MAC address, destination MAC address, source IP address, desti-
nation IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other defi-
nition ACL, Support ACL based on port and VLAN
Safety Characteristics Support user grading management and password protection
Support IEEE802.1X authentication / centralized MAC address authentication
Support AAA&RADIUS authentication
Support the number of MAC address learning restrictions
Support MAC address black hole
Support SSH 2.0 to provide secure passwords for user login
Support SSL to ensure data transmission security
Support port isolation
Support the speed limit function of ARP message
Support IP source address protection
Support ARP intrusion detection function
Support against DoS attacks
Support port broadcast message suppression
Support host data backup mechanism
Binding capabilities of IP+MAC+VLAN+ ports
Support TACACS+
Support Reverse Polarity
DHCP Support DHCP Client
Support DHCP Snooping
Management Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration
Support WEB network management (HTTPS)
Support FTP, TFTP, Xmodem, SFTP file download management
Support SNMP V1/V2C/V3
Support one bond reduction
Support NTP clock Support system work log Support Ping detection
Support cable state detection
Support CPU instant utilization status view
Support link layer discovery protocol LLDP center
Support RMON
System Requirements Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft
Internet Explorer10 or later
Cat5e or later Ethernet cable
TCP/ IP, network adapter and network operating system (Microsoft Windows, Linux or Mac OS
X) installed on every computer in the network
Certificates ISO 9001: 2015, ISO 20000-1 : 2018, ISO 14001 : 2015, ISO 45001 : 2018, ISO 50001:2018, CE,
FCC and RoHS, TEC/ MTCTE
ok
Start Your Training